The value of the DHMR4000 Series Dehumidifiers

Onboard Display Controller

  • Simplifies setup, configuration, and troubleshooting ​

  • Features tethered and magnetic mounting options ​

  • Communicates dehumidifier status​

  • Local control option enables dehumidifier to operate ​ independently without homeowner intervention​

  • FocusPRO based display

Efficiency

ENERGY STAR certified product line, including the only 65 PPD ENERGY STAR certified unit in market​

​Integrated energy factor calculated under ENERGY STAR test conditions​

  • 73F​

  • 60% RH​

  • 0.2” WC​

Smart Sensors

Sensing Protection​

  • Compressor overcurrent​

  • Low inlet air temperature​

  • Continuous runtime​

  • Low refrigerant​

  • Controller failure​

  • Overheating compressor​

  • Fan overcurrent​

  • PCB failure​

  • Frozen coil​

  • Sensor failure​

  • High ambient temperature​

  • Unit undersized​

  • High inlet air temperature​

  • Voltage out of spec​

  • High outlet air temperature​

  • Water leakage​

  • Low airflow​

  • Water tray full​

Water Leak Detection

  • L-Series water leak detector cable used as an auxiliary water detection method (cable included)​

  • When a leak is detected, the dehumidifier shuts down​

  • Normal operation resumes when the alarm is cleared or the cable dries​

  • FLOAT terminals for installers utilizing float switches​

Ventilation

  • Timed ventilation (minutes per hour) can be programmed through the onboard control​

  • Ability to power and control a fresh air damper​.

  • Compressor automatically turns on during ventilation if incoming air RH is higher than setpoint​

Note:
Fresh Air Ventilation System with True Zone Damper is sold separately