FocusPRO^® P200 & S200 Series Thermostats

Package Includes:

• FocusPRO® P200 or S200 Series Thermostat

• UWP Wall Plate

• Decorative Cover Plate with J-Box Adapter

• Screws and Anchors

• 2 AA Batteries (with P200 models)

• Thermostat Literature

Compability (for indoor use only)

TH2110U4004 & TH2110WF4008 models compatible with 24 VAC, single-stage heating and cooling systems including:

• Heat pumps without auxiliary heat

• Gas/oil/electric forced air

• Single stage cooling

• Radiant Hydronic heat

• Hot water coil

• 750 MV (24 VAC needed at RC & C on S200 models. 750 MV to R and W; see the Wiring Terminal Designations section.)

TH2320U4006 & TH2320WF4010 models compatible with most 24 VAC heating and cooling systems including:

• Heat pumps with 1 or 2 compressor stages and auxiliary heat

• Dual fuel

• 1 or 2 stage Gas/oil/electric forced air

• 1 or 2 stage cooling

• Radiant Hydronic heat hot water coil

• 750 MV (24 VAC needed at RC & C on S200 models. 750 MV to R and W; see the Wiring Terminal Designations section.)

• S terminals for C7089U1006 wired outdoor sensor (used for Aux Heat lockout or balance point on heat pump systems. Alternatively, smart model can use the app.)

Note: Smart models TH2110WF4008 and TH2320WF4010 can use a 2.4 GHZ or 5 GHZ WiFi network.