Program Schedule

You can program four time periods each day, with different settings for weekdays and weekends. We recommend using the presets shown in the table at right; these presets are designed to reduce your heating/cooling expenses.We recommend using the presets shown in the table below; these presets are designed to reduce your heating/cooling expenses.

• WAKE: Set to the time you wake up and your desired temperature during the morning until you leave for the day.

• AWAY: Set to the time you leave home and your desired temperature while you are away (usually an energy-saving temperature).

• HOME: Set to the time you return home and your desired evening temperature until bedtime.

• SLEEP: Set to your bedtime and your desired overnight temperature (usually an energy-saving temperature).

1. Press MENU, then press or until SCHED is displayed.

2. A square appears around ON or OFF in the display. If you want to use a schedule, press or to select ON. Press SELECT to edit the schedule or press EXIT to exit the menu.

3. If editing the schedule, press SELECT to edit the day or days flashing in the display.

4. The word Wake should be flashing. Press NEXT. Press or to turn this schedule period on or off. Press NEXT.

5. If the schedule period was set to ON, the time will be flashing. Press or to adjust the time for this period. Press NEXT.

6. The Heat setpoint will be flashing. Press or to adjust the Heat setpoint for this period. Press NEXT.

7. The Cool setpoint will be flashing. Press or to adjust the Cool setpoint for this period. Press NEXT.

8. The display will show the next schedule period flashing. Repeat steps 4 – 7 for the Away, Home and Sleep schedule settings. After completing all schedule settings for the day(s) selected, repeat these steps for the other days.

9. Press the SAVE & EXIT button at upper left.

Program schedule override (Temporary)

1. Press or to adjust the temperature.

2. Once at the desired setpoint temperature, no further action is needed. The new setpoint temperature will be held until the next scheduled time period begins.

3. Press the SAVE button or wait for the display to time out and return to the Home screen.

To cancel the Temporary Hold, press and release the HOLD button to cycle through the settings until CANCEL HOLD is selected.

Program schedule override (Permanent)

1. Press or to adjust the temperature.

2. Once at the desired setpoint temperature, press and release the HOLD button to cycle through the settings until HOLD PERMANENTLY is selected.

3. Press the SAVE button or wait for the display to time out and return to the Home screen.

To cancel the Permanent Hold, press and release the HOLD button to cycle through the settings until CANCEL HOLD is selected.